zoom »

Wastewater lifting unit (concealed floor installation) Automatic drainage for showers, washbasins, washing machines/dishwashers, etc. Pumping of wastewater and drainage water free of faeces, fibres, grease and oil, and pumping of non-aggressive rainwater.

• Contemporary design
• Shower drains from height of 110 mm possible
• Low-noise operation

• Mains connection 1~230 V, 50 Hz
• Cable length from system to switchgear/plug 1.2 m
• Operating mode S1 (1000 h, Tmax 45 °C), S3-10 % (Tmax 75 °C)
• Fluid temperature max. 45 °C, for short periods (3 min) 75 °C
• Pressure port Ø 32 mm (G 1¼)
• Inlet connection 40 mm (2 x G 1¼)
• Ventilation connection 25 mm
• Protection class IP 44
• Gross tank volume 17 l
• Switching volume 2.6 l

• Ready-to-plug
• Thermal motor monitoring
• Level control with pneumatic pressure transducer
• Integrated non-return valve
• Fixation material
• Active carbon filter

Automatically switching wastewater lifting unit ready for connection with all of the required switchgear and control mechanisms and a built-in non-return valve. Including 2 inlet connecting pieces DN 40 at different height levels and pressure port DN 32 (G 1 ¼) as well as active carbon filter with overflow protection for aeration and ventilation.

Ventilation can also be carried out at roof level through the use of self-sealing plug couplers (external pipe diameter 25 mm).

• Motor: stainless steel
• Hydraulic housing: plastic
• Tank: ABS plastic

Automatically switching wastewater lifting unit ready for connection with active carbon filter.

• Connection material for inlet and pressure pipe
• Fixation material for buoyancy safeguards
• Installation and operating instructions